logo




SINGLE PHASE SERVO LITE 1st GEN: (SPSL-1G)

It is the single phase version of our Servo Lite Series.

Salient Features:

  • Micro Controller Based Design.
  • Fast (40ms) correction.
  • Field programmable servo parameters including correction accuracy using push button and LCD Display.
  • As the correction is done based on real time signal measurement, the servo will be stable even in nonsinusoidal environments.
  • Field Programmable multi stage TRIP and trip delay for low voltage, high voltage and overload.
  • Event Logging, Details of last trip is capture and stored in EEPROM. Elapsed time also displayed for evaluating the cause.
  • User friendly HMI.
  • Field programmable servo parameters and are stored in NV memory

SPSL 1G

THREE PHASE SERVO LITE : (TPSL)

Three Phase servo lite is the part of our legacy Servo Lite Family .

Salient Features:

  • Fast (40ms) correction.
  • Field programmable servo parameters including correction accuracy using push button and LCD.
  • Phase reversal/single phasing protection.
  • Real time correction.
  • As the correction is done based on real time signal measurement, the servo will be stable even in nonsinusoidal environments.
  • Field Programmable Multi stage TRIP and trip delay for low voltage, high voltage and overload.
  • Manual drive can be done by pushbutton.
  • MCCB can be used for tripping.
  • Details of last trip is capture and stored in EEPROM. Elapsed time also displayed for evaluating the cause.
  • User friendly HMI.
  • Field programmable servo parameters and are stored in NV memory.
  • Independent output voltage setting.
  • Phase to phase voltage measurement for output.
  • As the servo parameters are stored in Non-volatile memory, the servo parameters will be retained forever.
  • The servo parameters like regulation voltage, high cutoff, low cutoff and overload cutoff can be configured in the field without switching off the servo and without disturbing the Hardware.

TPSL 1G